Best iPhone 17 Pro Max Screen Protector: 7 Compared

The iphone 17 pro max screen protector worth buying first is the ESR Armorite Pro, because it is the only sheet here made with Accessory Glass by Corning and it pairs that with an anti-reflective coating and two sheets per box. If you want the biggest toughness numbers instead, TORRAS quotes 12 ft and MIL-STD-810H. The ZAGG XTR5 adds a blue light filter, Spigen handles privacy, and the Ailun three-pack is the one to buy when you expect to ruin an install.

The panel you are covering is a 6.9-inch Super Retina XDR OLED at 2868 by 1320 and 460 ppi, which Apple measures as 6.86 inches as a standard rectangle. Apple already puts a Ceramic Shield 2 front on it under a fingerprint-resistant oleophobic coating and an anti-reflective coating, so a weak protector can end up glarier and greasier than the bare screen. The phone measures 163.4 by 78.0 by 8.75 mm, and Face ID runs through the Center Stage front camera at the top of the display, which is why the cutout has to be right. All of it is on the iPhone 17 Pro Max tech specs page.

#	Protector	Finish	Install method	Strength claim	Sheets
1	ESR Armorite Pro	Clear, anti-reflective	Two-step tray, dust strip	Corning glass, 10x stronger	2
2	TORRAS Aerospace 9H+	Clear	One-pull kit	12 ft, MIL-STD-810H	1
3	ZAGG XTR5 Glass	Anti-reflective, blue light	PerfectFit two-step	11x stronger, graphene	1
4	Spigen Privacy	Privacy filter	EZ FIT tray	10H surface hardness	1
5	TOCOL Auto Install	Clear	Auto-align, place and pull	8 ft, 16,000 scratches	1
6	Ailun 3 Pack	Clear	Install frame	0.33 mm tempered glass	3
7	OMOTON Privacy 2 Pack	Privacy filter	Alignment frame, pull tab	9H tempered glass	2

1. ESR Armorite Pro: Corning Glass With an Anti-Reflective Coat

ESR builds this sheet from Accessory Glass by Corning and says it is 10 times stronger than a generic protector. Corning lab data is also where ESR gets its scratch numbers: up to twice the scratch performance and up to a 25 percent reduction in how visible scratches are, which matters more day to day than a drop rating most people never test.

What ESR calls AR Max Clarity is an anti-reflective coating that lets more light through, aimed at HD streaming and direct sun on a display Apple already rates at 3000 nits peak outdoor brightness. Installation is a two-step application tray with a built-in dust removal strip, and the box holds two sheets. ESR lists it for the iPhone 18 Pro Max and 17 Pro Max only.

What it does well

• The only sheet here made with Accessory Glass by Corning
• Anti-reflective coating plus two sheets in one box
• Dust removal strip built into a two-step tray

What to know before buying

• ESR quotes no drop height or military standard
• The strength figure is a multiple, not an absolute measurement

2. TORRAS Aerospace 9H+: 12 ft and a 325 lb Stress Test

TORRAS puts the hardest numbers on the table. It describes a four-layer dense molecular structure in aerospace glass, rates it shatterproof from 12 ft, and says its own lab ran more than 14,000 drop tests with no cracks, 25,000 scratch tests with no scratches and a 325 lb stress test with nothing broken. It also cites certification to MIL-STD-810H.

The cut is a 2.5D edge-to-edge design with what TORRAS calls a 6X tempered edge, meant to sit gap-free with no light leak around the rim. Installation is a one-pull kit that aligns and applies in a single movement, and TORRAS backs it with a 12-month replacement warranty. The catch is the count: one sheet, so a ruined install costs the whole purchase.

What it does well

• A 12 ft shatterproof claim certified to MIL-STD-810H
• A 325 lb stress test and 25,000 scratch tests, both stated by TORRAS
• One-pull install kit and a 12-month replacement warranty

What to know before buying

• A single sheet per box
• Clear glass only, with no anti-reflective or privacy layer

3. ZAGG XTR5 Glass: Graphene, Blue Light Filtering and Lower Glare

ZAGG reinforces this one with graphene and says the result tests 11 times stronger than basic tempered glass. That is the largest multiplier quoted in this group, and it comes with ZAGG’s anti-reflective treatment, which the brand says deepens blacks and makes colours read more vividly rather than just cutting shine.

The feature that sets it apart is Eyesafe CPF60, a filter targeting the specific blue light wavelengths tied to sleep and eye comfort, without washing the screen out. An SiO2 coating keeps the surface slick for gaming and typing, and ZAGG’s PerfectFit two-step kit handles alignment. If you want the same thinking applied to the back of the phone, our iPhone 17 Pro Max case picks covers that.

What it does well

• Graphene reinforcement tested at 11x basic tempered glass
• Eyesafe CPF60 blue light filtering, unique in this list
• Anti-reflective layer plus an SiO2 smooth-touch coating

What to know before buying

• Sold as a single sheet
• Blue light filtering is a trade some users notice in colour

4. Spigen Privacy: Side Angles Go Dark, Face ID Still Works

Spigen uses high-purity alumina-silicate glass strengthened by ion exchange, the same chemically strengthened glass approach behind most 9H claims, and builds a privacy filter into it. From directly in front the screen stays bright and sharp; from the sides it darkens, which is the point on a commute or in an open office. Spigen rates the surface at 10H.

At 0.25 mm it is the thinnest sheet here, and Spigen says touch sensitivity is unchanged. It also spells out sensor compatibility: Face ID works through the front camera, and Always-On display and edge gestures are preserved. The EZ FIT auto-alignment tray is the easiest install mechanism in this roundup, and the edges are cut short of the curve to fit inside most cases.

What it does well

• Privacy filter that darkens the screen from side angles
• EZ FIT auto-alignment tray lands it straight first try
• 0.25 mm, the thinnest sheet in this group, rated 10H

What to know before buying

• Privacy glass dims the display head-on as well
• One sheet per box at a premium price

5. TOCOL Auto Install: Place, Press, Pull

TOCOL’s pitch is the install. The frame auto-aligns, removes dust and bonds on contact, so the sequence is place, press and pull with nothing to line up by eye. For anyone who has thrown away a crooked sheet, that is worth more than another hardness number.

The glass itself is triple ion-exchange strengthened, which TOCOL rates at 9H+ and says withstands 8 ft drops and 16,000 scratches. It measures 0.33 mm with 99.99 percent light transmittance, under a nano-coating TOCOL describes as silk-like for fast swiping. Cover runs 365 days.

What it does well

• Auto-align frame with dust removal and instant adhesion
• 8 ft drop and 16,000 scratch claims from triple ion exchange
• 99.99 percent light transmittance at 0.33 mm

What to know before buying

• A single sheet in the box
• No anti-reflective or privacy treatment

6. Ailun 3 Pack: Three Sheets and an Install Frame

Three sheets per box is the whole argument. At 0.33 mm, Ailun describes HD ultra-clear rounded glass with 99.99 percent touch accuracy and a hydrophobic and oleophobic coating against sweat and fingerprints. None of that is remarkable on its own, and it does not need to be at this price per sheet.

An installation frame comes in the box for dust removal and alignment. Ailun is blunt about fit: the sheet is for the 6.9-inch iPhone 18 Pro Max and 17 Pro Max and explicitly not for the 6.3-inch iPhone 17, 18 Pro or 17 Pro, which look nearly identical in a listing photo. Check the line before ordering.

What it does well

• Three sheets, the lowest cost per sheet here
• Installation frame included for dust and alignment
• Listed for both the 18 Pro Max and 17 Pro Max

What to know before buying

• No drop height, standard or strength multiple is quoted
• Plain clear glass with no glare or privacy treatment

7. OMOTON Privacy 2 Pack: Anti-Spy Glass Without the Premium

This is the cheaper route to a privacy filter, and the only one here that gives you two of them. OMOTON pairs anti-spy filtering with full coverage on 9H tempered glass, and says the design is exclusive to the 6.9-inch iPhone 17 Pro Max rather than shared with other models.

Installation is an alignment frame with a pull tab: position the frame, pull, and the sheet drops into place. OMOTON suggests watching its tutorial first, which is a fair signal that this is less forgiving than a tray. An oleophobic layer handles smudges, a worthwhile addition on privacy glass, which tends to show grease more than clear sheets.

What it does well

• Two privacy sheets per box, unusual at this price
• Full coverage 9H glass cut for the 6.9-inch panel only
• Oleophobic layer on a finish that normally shows smudges

What to know before buying

• OMOTON quotes no drop height or hardness beyond 9H
• Frame and pull tab is less forgiving than a tray

Clear, Anti-Reflective, Privacy or Matte on a 6.9-Inch Screen

The finish changes more about daily use than the glass strength does, and the four types here solve different problems:

• Clear glass, from TORRAS, TOCOL and Ailun, keeps Apple’s own anti-reflective coating doing the work and adds nothing optical of its own.
• Anti-reflective glass, from ESR and ZAGG, puts a coating on top to cut mirror reflections, which is the one to pick if you use the phone outdoors.
• Privacy glass, from Spigen and OMOTON, narrows the viewing cone so side-on viewers see a dark screen, at the cost of some brightness head-on.
• Blue light filtering, which only the ZAGG XTR5 offers here through Eyesafe CPF60, targets evening use rather than glare.

Sheets per box is the other number worth weighing. Four of these ship a single sheet, ESR and OMOTON ship two, and Ailun ships three. If this is your first time fitting glass to a phone this size, buy more than one or buy a tray.

Does an iPhone 18 Pro Max Protector Fit the iPhone 17 Pro Max?

Usually yes, and two brands here say so outright. The ESR Armorite Pro and the Ailun three-pack are both listed for the iPhone 18 Pro Max and 17 Pro Max together, because the two phones share a 6.9-inch panel in a 163.4 by 78.0 mm body. Our iPhone 18 Pro Max screen protector roundup covers the newer phone in full.

What does not transfer is the smaller Pro. The iPhone 17 Pro uses a 6.3-inch display in a 150.0 by 71.9 mm body, so its sheets are visibly shorter and narrower even though listing photos look alike. Generation differences between the two Max models are set out in our iPhone 18 Pro Max guide.

Fitting Glass to the iPhone 17 Pro Max Without Bubbles

Trays and frames do most of the work, but the failure is almost always dust rather than alignment. ESR and TORRAS both build a dust removal step into the kit, TOCOL folds it into the frame, and Spigen’s EZ FIT tray positions the sheet so you never judge the gap by eye.

Two habits help whichever you buy. Fit it in a bathroom shortly after a hot shower, because the settled air carries less dust, and lift a trapped speck with tape rather than pressing it flat. A bubble with nothing under it will usually clear itself within a day as the adhesive settles.

Which iPhone 17 Pro Max Screen Protector Should You Buy?

Start with the ESR Armorite Pro. Corning glass, an anti-reflective coat, a dust-strip tray and two sheets cover the things that actually go wrong, and nothing else here does all four. Move to the TORRAS sheet if you want the biggest protection numbers on paper, or the ZAGG XTR5 if evening screen time bothers your eyes.

Pick Spigen Privacy if strangers read your screen on a commute, or OMOTON if you want that for less and will accept a frame instead of a tray. The TOCOL sheet is the one to buy if installing glass makes you nervous, and the Ailun three-pack is the honest budget answer for a phone this size.

Frequently Asked Questions

What is the best screen protector for the iPhone 17 Pro Max?

The ESR Armorite Pro. It is made with Accessory Glass by Corning, adds an anti-reflective coating, installs with a two-step tray and dust strip, and comes two to a box.

Does a screen protector stop Face ID working on the iPhone 17 Pro Max?

No. Face ID runs through the Center Stage front camera, and these sheets are cut around it. Spigen states outright that Face Unlock, Always-On display and edge gestures all keep working.

Which iPhone 17 Pro Max screen protector is toughest?

On stated figures, the TORRAS sheet: 12 ft shatterproof, MIL-STD-810H certification, a 325 lb stress test and more than 14,000 drop tests in the brand’s own lab.

Do iPhone 17 Pro protectors fit the iPhone 17 Pro Max?

No. The 17 Pro has a 6.3-inch display in a 150.0 by 71.9 mm body against 6.9 inches and 163.4 by 78.0 mm here, so the sheets are different sizes.

Related Articles

• Best iPhone 17 Pro Cases: 7 Compared on Grip, Stands and Drops
• Best iPhone 17 Screen Protector: 7 Compared on Glass
• iOS 27 Supported Devices: iPhone List and Which Models Get Siri AI

As an Amazon Associate, Fox Bulletin earns from qualifying purchases.