The best Switch 2 case for most owners is the PowerA Protection Case, a zippered carrying case with a play stand that doubles as a padded screen cover and room for game cards and microSD Express cards. Spigen and Belkin cover the soft pouch and sling styles, while SUPCASE and Spigen Dual Grip Pro are shells that stay on the console.
The Switch 2 launched with the June 5, 2025 release, and its 7.9-inch screen is large enough to want a cover. With Joy-Con 2 attached it measures about 4.5 in tall, 10.7 in wide and 0.55 in thick. A carrying case guards the console in a bag, while a shell or grip protects it during play. More hardware for the console sits in the console guide.
Switch 2 Case Picks by Type, Game Card Storage and Dock Fit
| # | Case | Kind | Game cards | Standout detail |
|---|---|---|---|---|
| 1 | PowerA Protection Case | Carrying case, zippered | 9 plus 2 microSD Express | Play stand and padded screen cover |
| 2 | Spigen Slim Carrying Case | Carrying pouch, nylon | 12 | G-Hook and padded screen cover |
| 3 | Belkin Sling Crossbody Bag | Carrying bag | Up to 10 | Fits Belkin Charging Grip and Pro Controllers |
| 4 | HORI Quilted Carry Case | Carrying bag, soft | Not specified by HORI | Retro pixel design, carry handle |
| 5 | SUPCASE Joy Con Remove Friendly | On-console shell | None | Hinged Joy-Con coverage, docks |
| 6 | Spigen Dual Grip Pro | On-console grip shell | None | Aluminum kickstand, docks |
| 7 | MagiNear Cat Shell | On-console shell and grips | None | Silicone Joy-Con 2 covers |
1. PowerA Protection Case: Zippered Carrying Case With a Play Stand

This is a carrying case: a sturdy outer shell with a zipper pull and a molded interior with soft plush lining. A removable holder stores nine game cards and two microSD Express cards, and a zippered mesh pocket holds Joy-Con 2 wrist straps, earbuds and a charging cable.
The play stand unfolds for tabletop mode and doubles as a padded screen protector when the console is inside. It is officially licensed, and PowerA says it also works with the Switch and Switch OLED.
What it does well
- Padded stand doubles as a screen cover.
- Holds nine game cards and two microSD Express cards.
- Zippered mesh pocket for straps and cables.
- Officially licensed.
What to know before buying
- It is a case you carry, not a shell the console plays in.
- Mesh pocket is sized for small accessories, not a charger.
2. Spigen Slim Carrying Case: A Nylon Pouch With 12 Card Slots

Spigen calls this the Klasden Pouch 2. It is a nylon pouch with YKK zippers, 3 mm layered panels on the top and bottom, and a built-in padded screen cover. Twelve game card slots keep the library organised.
A rear curved grip and a G-Hook clip the pouch to a backpack strap or belt loop, and a Strap Keeper gives two carry styles. Spigen says it pairs with its screen protectors, Joy-Con grips and chargers.
What it does well
- Padded screen cover built in.
- Twelve game card slots.
- G-Hook for backpack or belt loops.
- YKK zippers on a nylon pouch.
What to know before buying
- A pouch is softer than a hard shell, so protection comes from padding rather than a rigid wall.
- Built for the console and cards, not for a charger.
3. Belkin Sling Crossbody Bag: Room for Controllers and a Power Bank

Belkin’s bag is sized for a console plus accessories. It fits the Switch 2 with the Belkin Charging Grip, up to two Pro Controllers, a power bank and cables, with mesh pockets for chargers and earbuds.
A Velcro strap holds the console in place, and padded lining protects it from bumps and scratches. Dedicated slots hold up to ten games, and a grab handle or adjustable shoulder strap makes it a sling.
What it does well
- Fits the Switch 2 with a charging grip and two Pro Controllers.
- Mesh pockets for chargers and earbuds.
- Dedicated slots for up to ten games.
- Grab handle and shoulder strap.
What to know before buying
- Soft sling bag with padded lining rather than a hard shell.
- Larger than a slim pouch if you only carry the console.
4. HORI Quilted Carry Case: A Soft Bag With a Retro Pixel Design

The Quilted Carry Case is a medium soft carry bag with a handle, made for storing and transporting the console and extra accessories. The retro pixel design is the main styling hook.
It is officially licensed by Nintendo and Pokemon, and HORI says it works with the Switch and the Switch 2.
What it does well
- Soft bag with a carry handle.
- Officially licensed by Nintendo and Pokemon.
- Room for the console and some accessories.
What to know before buying
- The retro pixel print will not suit everyone.
- A soft bag, so it does not stay on the console during play.
5. SUPCASE Joy Con Remove Friendly: A Hinged Shell That Docks

This is an on-console shell. SUPCASE says it docks without removal and that a hinge mechanism lets Joy-Con controllers be assembled and removed quickly while the case stays on.
The polycarbonate shell is rated to MIL-STD-810G 516.6 by SUPCASE, with a 2.5 mm raised bezel around the screen and a rubberized anti-slip finish. It weighs 139 g.
What it does well
- Docks without taking the case off.
- Hinged Joy-Con coverage for quick removal.
- MIL-STD-810G 516.6 claim and a 2.5 mm raised bezel.
- Anti-slip rubberized texture.
What to know before buying
- SUPCASE says it is not compatible with the console’s kickstand function.
- Adds 139 g to the console in the hand.
- A shell protects during play but is not a travel case.
6. Spigen Dual Grip Pro: Ergonomic Grips and an Aluminum Kickstand

Dual Grip Pro is an on-console grip case. Ergonomic grips give a stable hold for long sessions, and a flip-open grip lets you remove Joy-Con controllers without taking the case off.
An adjustable aluminum kickstand with anti-slip padding gives stable tabletop viewing at adjustable angles. Spigen says to open the kickstand upward when docking, so the case stays on in the dock.
What it does well
- Ergonomic grips for longer handheld play.
- Aluminum kickstand with adjustable angles.
- Flip-open grip for Joy-Con removal.
- Stays on in the dock with the kickstand raised.
What to know before buying
- Works only with the Switch 2, not earlier Nintendo consoles.
- Adds grip bulk, so it will not suit a slim pouch.
7. MagiNear Cat Shell: Hard Case With Silicone Joy-Con 2 Covers

MagiNear sells a split-design hard shell with a shock-resistant PC back and soft silicone Joy-Con 2 covers, so the Joy-Con can come off without removing the case. A cat theme comes in three colours.
The set includes two thumb caps with a fish pattern, and MagiNear says it works in dock and TV mode. It suits younger players who want a comfortable, colourful hold.
What it does well
- Soft silicone Joy-Con 2 covers for hold.
- Split design for Joy-Con removal without taking the case off.
- Two thumb caps included.
- Works with the dock.
What to know before buying
- A themed look will not suit everyone.
- On-console shell only, so you will still want a carrying case for travel.
Carrying Cases and On-Console Shells Do Different Jobs
A carrying case protects the console in a bag. PowerA, Spigen, Belkin and HORI fall into this group, with game card slots, padded screen covers and in some cases room for controllers and a power bank. They do nothing while you play.
An on-console shell stays on during use. SUPCASE, Spigen Dual Grip Pro and MagiNear wrap the console and Joy-Con 2, add grip and corner protection, and stay on in the dock. The console weighs about 1.18 lb with Joy-Con 2 attached, so grip bulk is felt in the hand.
Many owners will want both: a shell for daily use and a pouch or case for trips. If you only buy one, pick by where the console spends most of its time.
Dock Fit, USB-C Ports and Game Card Storage
The console has two USB-C connectors, and the bottom one charges and connects to the dock. A shell that blocks that port is a problem, which is why SUPCASE, Spigen and MagiNear all say they dock without removal.
The dock measures about 4.5 in tall, 7.9 in wide and 2 in thick, and a thick grip shell needs space to slide in. Storage matters too. The game card slot takes Switch 2 and Switch cards, and the microSD Express slot accepts only microSD Express cards, up to 2 TB.
Before buying a carrying case:
- Count game card slots against how many physical games you own.
- Check whether microSD Express cards have a place.
- Pick a larger bag if you carry a dock or charger, as in the docking station guide.
- Pair it with one of the power banks in the power bank picks for long trips.
Which Switch 2 Case to Buy
PowerA Protection Case is the safe pick for most owners: it is zippered, officially licensed, and its padded stand covers the screen. Spigen’s pouch suits commuting, and Belkin’s sling suits someone who carries controllers and a power bank.
For play at home or in handheld mode, Spigen Dual Grip Pro adds a kickstand and grips, SUPCASE adds a hinged Joy-Con cover and MagiNear adds colourful silicone. HORI suits owners who like a retro pixel look.
Frequently Asked Questions
Does the Switch 2 need a case?
A 7.9-inch screen is exposed in a bag, so a carrying case with a padded screen cover is sensible. A shell adds grip and edge protection during play. Many owners use one of each.
Do original Switch cases fit the Switch 2?
Not reliably. Several cases state they work with the Switch, Switch OLED and Switch 2, but a case sold only for the original console should not be assumed to fit. Buy one that names the Switch 2.
Can I dock the Switch 2 with a case on?
Only with a dockable shell. SUPCASE, Spigen Dual Grip Pro and MagiNear all say they dock. For Spigen, open the kickstand upward first.
How many game cards can these cases hold?
Spigen’s pouch holds twelve, Belkin up to ten and PowerA nine plus two microSD Express cards. On-console shells hold none.
Related Articles
As an Amazon Associate, Fox Bulletin earns from qualifying purchases.
Get the Fox Bulletin briefing
The stories that matter, in your inbox. No spam, unsubscribe anytime.
Newsletter signup will be available soon.
