The best mobile cooler for gaming is a magnetic Peltier cooler that plugs into a wall charger and chills the back of your phone below room temperature, because that is what stops a phone from throttling its frame rate halfway through a match. A plain clip-on fan only moves warm air around. For most players the Black Shark Magnetic Phone Cooler 6 Pro is the one to buy: 35W of cooling, a live temperature display and a ring plate so it works on Android phones as well as iPhones.
The seven coolers below run from a 75-gram budget cooler to a 40W model built for iPads and tablets. Cooling power, noise ratings, mounting options and what comes in the box are taken from each maker’s listing and site, checked on 30 September 2026. If you mostly play console ports, our guide to the best AAA games on iPhone covers the games that heat a phone up fastest.
Best Mobile Coolers for Gaming at a Glance
Look at the charger column first. Every cooler here runs on its own USB-C power, and a cooler on a weak phone charger will not reach its rated power.
| Mobile cooler | Cooling power | How it attaches | Noise (maker rating) | Charger to use | Weight |
|---|---|---|---|---|---|
| Black Shark Magnetic Phone Cooler 6 Pro | 35W | Magnetic, ring plate included | 39 dB or lower | 40W or more | 110 g |
| Black Shark Magnetic Phone Cooler 5 Pro | 35W | Magnetic or clip-on grips | 39 dB | 40W or more | 120 g |
| Black Shark FunCooler 6 | 20W | Magnetic only | 25 dB in silent mode | Over 20W, cable not included | 75 g |
| TELESIN Magnetic Phone Cooler Pro | Not stated | Magnetic, magnetic sheet included | Under 28 dB | 27W or more | About 85 g |
| K&F CONCEPT MPC02 | 20W | Magnetic or clamp for 55 to 80 mm devices | 28 dB at maximum | Not stated, cable included | Not stated |
| NEEWER BASICS PA069 | Not stated | Magnetic, ring and clip included | Not stated | USB-C, cable included | 82 g |
| Black Shark iPad Cooler | 40W | Magnetic, adhesive ring included | 30 dB in silent mode | Over 40W, cable not included | About 150 g |
1. Black Shark Magnetic Phone Cooler 6 Pro: Best Mobile Cooler for Gaming Overall
Cooling power: 35W · Lowest plate temperature: -13°F (-25°C) · Display: 0.71 in, full colour · Weight: 110 g
The 6 Pro is the strongest phone cooler here and the easiest to read. Black Shark rates it for a temperature drop of up to 122°F (50°C), with the cold plate reaching -13°F (-25°C). A small full-colour screen on the back shows power output, cooling level, the phone’s temperature and fan speed while you play, so you can see whether it is working rather than guessing from how the glass feels. You can also load your own wallpaper onto it.
The cooling hardware is Black Shark’s ICECOLD 2.0 system, with about 40 percent more fins than before and a 26 percent larger heat-dissipation area, in a body roughly 8 grams lighter. It has 16 addressable RGB LEDs and pairs with Black Shark’s app for control. At its March 2026 launch, Black Shark said dual temperature sensors guard against overcooling and condensation. A magnetic ring plate comes in the box, so non-magnetic Android phones can use it too, along with a USB-C to USB-C cable. The charger is not included, and Black Shark recommends 40W or more.
What it does well
- 35W cooling with a drop of up to 122°F (50°C).
- Live display of temperature, power and fan speed.
- Ring plate included for Android phones without magnets.
What to know before buying
- Needs a 40W or stronger charger, sold separately.
- At 110 grams, it is heavier than the budget coolers.
2. Black Shark Magnetic Phone Cooler 5 Pro: Best Clip-On Mobile Cooler for Android Phones
Cooling power: 35W · Lowest plate temperature: -4°F (-20°C) · Noise: 39 dB · Weight: 120 g
The 5 Pro has the same 35W rating as the 6 Pro but adds something the newer model lacks: two detachable grips that clamp it onto a phone. That makes it the better pick for Android phones with no magnets, and for any phone in a case that a magnet won’t hold through. With the grips off, it works as a normal magnetic cooler. Black Shark rates it for a drop of up to 113°F (45°C), with the plate going below freezing in 25 seconds.
Two NTC temperature sensors watch the inside of the cooler, and it shuts itself off if it goes above 140°F (60°C) or below -4°F (-20°C). The Shark Arsenal app adds manual control and continuous monitoring to prevent condensation inside. Air flows in and out through the top and bottom, so hot air does not blow onto your hands. It has 18 addressable RGB LEDs and a 1/4-inch thread for mounting on a streaming stand.
What it does well
- Clip-on grips for phones without magnets.
- Automatic shut-off outside its safe temperature range.
- 1/4-inch thread for tripods and streaming stands.
What to know before buying
- Heaviest phone cooler here at 120 grams.
- Needs a 40W or stronger charger, sold separately.
3. Black Shark FunCooler 6: Best Budget Mobile Cooler for Gaming
Cooling power: 20W · Magnet: 12N · Noise: 25 dB in silent mode · Weight: 75 g
The FunCooler 6 is the cooler to get if you mainly want a phone that doesn’t throttle in long sessions and don’t need the Pro models’ extras. It uses the same ICECOLD 2.0 system at 20W, weighs 75 grams, the lightest here, and holds on with a 12N magnet. One button cycles through overclock, standard and silent modes, and silent mode is rated at 25 dB, quiet enough for voice chat.
The Shark Arsenal app lets you set the power mode and fan speed, pick one of eight lighting effects and set an auto-shutdown timer. The vertical air duct sends hot air away from your fingers. Two things are missing from the box: a USB-C cable, and any ring or clip for phones without magnets. It is built for iPhones, iPads and magnetic Android phones, and Black Shark says to power it from a charger rated over 20W.
What it does well
- Lightest cooler here at 75 grams.
- 25 dB silent mode.
- App control with an auto-shutdown timer.
What to know before buying
- No USB-C cable in the box.
- No ring or clip for non-magnetic phones.
4. TELESIN Magnetic Phone Cooler Pro: Best Quiet Mobile Cooler for Gaming and Streaming
Plate temperature: 17.6°F (-9°C) within 1 minute · Noise: under 28 dB · Display: side temperature readout · Weight: about 85 g
TELESIN built this cooler for people who talk while they play. It is rated at under 28 decibels, so the fan does not end up on a stream or a voice call, and its plate drops to 17.6°F (-9°C) within a minute. A small readout on the side shows the plate temperature as you play, and a dual-core temperature control chip adjusts to the room you are in.
The magnet rotates, so you can turn the cooler to suit a landscape or portrait grip, and it also fits TELESIN’s magnetic neck mount for hands-free recording. The box includes a USB-C cable and a magnetic sheet for Galaxy, Pixel and other phones without magnets. TELESIN recommends a 27W or stronger charger (9V/3A) and notes that a phone case reduces how well it cools.
What it does well
- Under 28 dB, among the quietest here.
- Live plate temperature on the side.
- Rotating magnet and neck-mount support.
What to know before buying
- No app and no stated cooling wattage.
- Works best with the case off.
5. K&F CONCEPT MPC02 Magnetic Phone Cooler: Best Mobile Cooler for Gaming and Filming
Cooling power: 16W or 20W, plus AI mode · Fan: 5,000 rpm · Noise: 28 dB at maximum · Mount: magnet or clamp
K&F Concept makes camera gear, and it shows. The MPC02 has a magnetic plate on its back as well as its front, so you can stack a ring light, a phone stand or a selfie stick behind the cooler while it cools the phone. That suits anyone who records or streams their games. The side slots take an included clamp that fits devices 55 to 80 mm wide, for phones that a magnet won’t hold.
The face that touches the phone is aluminium rather than silicone, which K&F says conducts heat more than 20 times faster. Buttons switch between P1 (16W), P2 (20W) and an AI mode that holds the plate around 50°F (10°C) to stop condensation and frost. It even stays at 28 dB on its highest setting, and it cuts out if its board passes 140°F (60°C). A 1-metre cable, a magnetic sheet and the phone clamp come in the box. K&F advises taking the phone out of its case for the best results.
What it does well
- Rear magnetic plate for lights, stands and selfie sticks.
- AI mode that prevents condensation.
- Magnet and clamp both included.
What to know before buying
- 20W maximum, below the 35W Black Sharks.
- No app control.
6. NEEWER BASICS PA069: Best Simple Mobile Cooler for iPhone, Android and Switch
Modes: High Speed and Intelligent · Fan: seven-blade hydraulic bearing · Size: 62 x 62 x 26 mm · Weight: 82 g
The PA069 is the plug-in-and-play option. There is no app to install: one button switches between a High Speed mode for gaming and an Intelligent mode that adjusts cooling to keep noise down. It sticks straight onto iPhone 12 through iPhone 17 models and MagSafe cases, and the box has everything else you need, including a magnetic ring for Galaxy and Pixel phones, a fixing clip for tablets and a Nintendo Switch, and a USB-C cable.
It uses a semiconductor cooling plate with a seven-blade fan on a hydraulic bearing, which tends to run quieter than the basic sleeve bearings in cheap fans. The RGB ring cycles through running, gradient and breathing effects, and it can be turned off. One limit, confirmed on NEEWER’s product page: it does not pass magnetic charging through, so charge the phone by cable while it is attached.
What it does well
- Magnetic ring, clip and USB-C cable all in the box.
- Works on phones, tablets and Nintendo Switch.
- No app needed, and the RGB can be switched off.
What to know before buying
- No stated cooling wattage or noise rating.
- No MagSafe charging while attached.
7. Black Shark iPad Cooler: Best Mobile Cooler for iPad and Tablet Gaming
Cooling power: 40W · Magnet: 14N · Noise: 30 dB in silent mode · Weight: 0.33 lb
A tablet has more glass to cool than a phone, and this is the only cooler here built for it. Black Shark gave it 40W of cooling, a larger plate and a 14N magnet so it stays put on a bigger, heavier device. It works with the iPad, Surface Pro and Samsung Galaxy Tab, and an adhesive magnetic ring in the box adds support for devices without magnets, including the Steam Deck.
A button cycles through Overclock, Smart, Silent and Custom modes, and the Shark Arsenal app controls power, fan speed and the 18 RGB LEDs from your phone. Silent mode is rated at 30 dB. As with the FunCooler 6, the USB-C cable is not included, and it needs a charger rated over 40W to run at full power.
What it does well
- 40W, the most cooling power here.
- 14N magnet for heavier tablets.
- Adhesive ring for the Steam Deck and non-magnetic tablets.
What to know before buying
- Too big for most phones.
- No cable in the box, and it needs a charger over 40W.
How Does a Mobile Cooler for Gaming Work?
Every cooler on this list uses a Peltier module, also called a semiconductor or thermoelectric cooler. When current flows through it, one side turns cold and the other turns hot. The cold side presses against the back of your phone and pulls heat out of it, and a small fan blows the heat away from the hot side. That is why these coolers can take the phone below room temperature, which a plain fan cannot do, and why they need a wall charger rather than a small battery. The wattage on the box is the power the module draws, so a 35W cooler gets colder than a 20W one, but only when the charger can supply it.
Does a Phone Cooler Really Stop Lag in Games?
It stops the lag that heat causes, which is most of the slowdown in long sessions. Apple says iPhones are designed for ambient temperatures between 32° and 95°F (0° and 35°C). It also says a graphics-intensive game played in hot conditions can lower frame rates, slow or stop charging, and trigger the “iPhone needs to cool down” warning. Android phones throttle in the same way. A cooler keeps the chip below the point where the phone starts cutting its speed, so frame rates hold steady. It will not fix lag caused by your connection or by a game your phone can’t run well to begin with.
Can a Phone Cooler Damage Your Phone?
Heat is the bigger risk to a phone, but a cooler brings one problem of its own: condensation. When the plate drops below the dew point, water forms on the plate and the back of the phone, just as it does on a cold drink. That is why the better coolers have a smart mode. The Black Shark 5 Pro and 6 Pro use temperature sensors to avoid overcooling. The K&F MPC02’s AI mode holds the plate around 50°F (10°C). In a humid room, use those modes instead of maximum, and wipe the back of the phone when you take the cooler off.
Will a Magnetic Phone Cooler Work on Android or With a Case?
On an iPhone with MagSafe, a magnetic cooler snaps straight onto the back or onto a MagSafe case. Many Android phones have no magnets, so they need the metal ring or sheet that comes with the Black Shark 6 Pro, TELESIN, K&F and NEEWER coolers, or a clip-on cooler like the 5 Pro. Cases work but cost you cooling: TELESIN and K&F both say the phone cools better without one, because the case sits between the cold plate and the phone. If you keep a case on, choose a thin MagSafe one. Our iPhone 18 Pro Max case guide lists slim MagSafe options.
What Charger Do You Need for a Phone Cooler?
A USB-C wall charger at least as strong as the cooler, and in the Black Shark Pros’ case stronger. Black Shark recommends 40W or more for the 6 Pro, 5 Pro and iPad Cooler, and more than 20W for the FunCooler 6. TELESIN asks for 27W or more. A laptop port or a low-watt phone charger will not supply enough power for full cooling. Keep in mind that the cooler uses its own cable, so charging the phone at the same time takes a second cable and outlet, or a charger with two USB-C ports and enough power for both.
Which Mobile Cooler for Gaming Should You Buy?
For most people, the Black Shark Magnetic Phone Cooler 6 Pro is the best mobile cooler for gaming: the most cooling of any phone model here, a screen that shows it working and a ring plate for Android. If your phone has no magnets or you keep it in a thick case, the 5 Pro’s clip-on grips are the safer bet. The FunCooler 6 is the budget pick for iPhone owners.
Pick the TELESIN if you talk on stream or in voice chat, the K&F if you film your gameplay with a light or stand attached, the NEEWER if you want everything in the box with no app, and the Black Shark iPad Cooler for tablets and the Steam Deck. If you are still choosing between phone and console gaming, our best gaming consoles guide compares the current systems.
Frequently Asked Questions
What is the best mobile cooler for gaming?
The Black Shark Magnetic Phone Cooler 6 Pro, with 35W of cooling, a live temperature display and a ring plate for Android phones. The Black Shark 5 Pro is better for phones without magnets, and the FunCooler 6 is the best budget option.
Do phone coolers work on iPhone?
Yes. Every phone cooler here attaches magnetically to any iPhone with MagSafe, or to a MagSafe case, with no ring needed. The NEEWER lists iPhone 12 through iPhone 17 models.
Do phone coolers need to be plugged in?
Yes, all seven on this list do. Peltier coolers draw 20 to 40 watts, so they run from a USB-C wall charger rather than a built-in battery.
Is a phone cooler worth it for gaming?
If your phone gets hot, dims its screen or drops frames after 20 or 30 minutes of play, yes. If you play short sessions of light games, your phone probably never gets hot enough for one to matter.
Can I charge my phone while using a phone cooler?
Yes, through the phone’s USB-C or Lightning port with a separate charger. A magnetic cooler covers the wireless charging area, and the NEEWER PA069 says outright that it does not support magnetic charging.
Are phone coolers loud?
The quiet ones are not. The FunCooler 6 is rated at 25 dB in silent mode, the TELESIN at under 28 dB and the K&F at 28 dB even at full power. The 35W Black Shark Pros are louder at around 39 dB.
Related Articles
Get the Fox Bulletin briefing
The stories that matter, in your inbox. No spam, unsubscribe anytime.
Newsletter signup will be available soon.
Related stories
Best Samsung Galaxy Z Fold8 Ultra Cases: Top 8 Picks
The 6 best Samsung Galaxy Z Fold8 Ultra cases, from Spigen to official Samsung, plus why Fold8 cases will not fit the Ultra.
Best Samsung Galaxy Z Fold8 Cases: Top 8 Picks
The 6 best Samsung Galaxy Z Fold8 cases, from Spigen to official Samsung and dbrand, plus why Fold8 Ultra cases will not fit.
Best Samsung Galaxy Z Flip8 Cases: Top 8 Picks
The 6 best Samsung Galaxy Z Flip8 cases with official Samsung pricing from $42.75, plus why third-party foldable cases arrive weeks after launch.